Difference between revisions of "PChem312 f20 w3"

From MC Chem Wiki
Jump to navigation Jump to search
 
(47 intermediate revisions by the same user not shown)
Line 6: Line 6:
 
Continue reading chapter 2
 
Continue reading chapter 2
  
====Sec 2.1: Internal Energy and !st Law of Thermodynamics====
+
====Sec 2.1: Internal Energy and !st Law of Thermodynamics (review)====
 
U <-- internal energy (1st thermodynamic state function)
 
U <-- internal energy (1st thermodynamic state function)
 
:U<sub>f</sub> - U<sub>i</sub> = ΔU, the change in the internal energy
 
:U<sub>f</sub> - U<sub>i</sub> = ΔU, the change in the internal energy
Line 17: Line 17:
 
:- changes in the system variables (ΔP, ΔV, ΔT, Δn) are an indication of ΔU; changes in system variables result in either heat (q) transfer or work (w) being done on or by the system; calculation of q or w leads directly to ΔU.
 
:- changes in the system variables (ΔP, ΔV, ΔT, Δn) are an indication of ΔU; changes in system variables result in either heat (q) transfer or work (w) being done on or by the system; calculation of q or w leads directly to ΔU.
  
:::ΔP, ΔV, ΔT, Δn --> q (heat), w (work) --> ΔU
+
::ΔP, ΔV, ΔT, Δn --> q (heat), w (work) --> ΔU
 +
 
 +
:::'''''Heat and work are both defined as a transfer of energy between the system and surroundings.'''''
 +
 
 +
'''''The first Law of thermodynamics can also be stated as:'''''
 +
::'''''ΔU = q + w'''''
  
 
====Sec 2.2: Heat (q)====
 
====Sec 2.2: Heat (q)====
Line 24: Line 29:
 
:Heat sign convention
 
:Heat sign convention
 
::- we speak of heat from the perspective of the system (unless otherwise stated).
 
::- we speak of heat from the perspective of the system (unless otherwise stated).
::- when the system loses heat, we identify this quantity of heat as negative, -q; loss of heat is generally associated with a decrease in temperature, ↓T.
+
::- when the system loses heat, we identify this quantity of heat as negative (or lost), -q; loss of heat is generally associated with a decrease in temperature, ↓T.
::- when the system gains heat, we identify this quantity of heat as positive, +q or q; ; gain of heat is generally associated with a increase in temperature, ↑T.
+
::- when the system gains heat, we identify this quantity of heat as positive, +q or q (or gained); ; gain of heat is generally associated with a increase in temperature, ↑T.
 +
 
 +
:'''Example'''
 +
heat (or caloric <-- historical) is measured by using a ''heat-meter'' or a calorie-meter, or '''''calorimeter'''''; hence ''calorimetry''.
 +
:[[File:calorimeter.PNG|300px]]
 +
:measure ΔT --> ΔT <span>&#8733;</span> q,
 +
:::::'''q = mass of H2O * specific heat/heat capacity * ΔT'''
 +
::Note: heat capacity is not really a constant...
 +
:::*[https://en.wikipedia.org/wiki/Table_of_specific_heat_capacities Wiki - Heat Capacities]
 +
:::*[http://www.vaxasoftware.com/doc_eduen/qui/caloresph2o.pdf table]
  
 +
===Wednesday, Sept 2, 2020===
 
====Sec 2.2: Work (w)====
 
====Sec 2.2: Work (w)====
Work is the transfer of energy between the system and surrounds.
+
:Work is transitory, only energy, not work is associated with the initial or final states. We '''DO NOT''' use the term Δw (for change in work), we instead say that work was done on or by the system.
 +
:Work occurs when a force is applied by the system or on the surroundings.
 +
:Work sign convention
 +
::- we speak of work from the perspective of the system (unless otherwise stated).
 +
::- when the system does work on the surroundings, we identify this quantity of work as negative (or lost), -w.
 +
::- when the system has work done on it by the surroundings, we identify this quantity of work as positive (or gain), +w or w.
 +
 
 +
=====Details=====
 +
:[[File:work_diagram.png|400px]]
 +
:[[File:Screen Shot 2020-09-02 at 8.04.33 AM.png|400px]]
 +
 
 +
=====Example Work (expansion) Calculation=====
 +
Calculate the work involved when 20.0 L of an ideal gas expands to a volume of 85.0 L against a constant pressure of 0.980 bar.
 +
:[[File:Screen Shot 2020-09-02 at 8.28.29 AM.png|400px]]
 +
 
 +
=====Types of Work (Table 2.1)=====
 +
:- Expansion work --> ΔP, ΔV, units Pa*m<sup>3</sup> = J
 +
:- Electrical work --> Potential (V <-- sorry not volume), current (I in amps), units Volts*charge = J
 +
:- others...spring stretching/contracting, surface tension, etc. (not discussed here).
 +
 
 +
=====Heat/Work (Electrical) Example=====
 +
Adiabatic Calorimeter
 +
:[[File:adiabatic_Cal.png|400px]]
  
===Wednesday, Sept 2, 2020===
+
Consider an adiabatic calorimeter where the inner bath (400 g H2O) temperature increases by 12.2 deg C; how long would the heater (120 V, @4.17 amps) run in order to insure that the outer bath (400 g H2O) would be at the same temperature?
 +
:''(P = I * V; w = V * I * sec; J = P * sec)
 +
:''answer: 41 sec''
  
 
===Thursday, Sept 3, 2020===
 
===Thursday, Sept 3, 2020===
 
Meet in CSB 378
 
Meet in CSB 378
 
====Activities====
 
====Activities====
 +
:- '''PChem Toolbox check'''
 +
::* identify tools --> list of tools[http://esr.monmsci.net/wiki/index.php/PChem_Toolbox here]
 +
::* does circuit tester work...plug it in...
 +
::* Demo of Kill-A-Watt (1500 W heating element, stirring hot plate)
 +
 +
:- '''Thermometer calculation/Excel'''
 +
::* Equation [http://esr.monmsci.net/wiki/images/1/14/The_Thermometer.pdf here]
 +
::* Set up spreadsheet (calculate change in height of liquid given other variables)
 +
::* Measure glass tubing dimensions (use calipers from toolbox)
 +
::* Use Excel to determine thermometer dimensions
 +
 +
:- '''Make thermometer'''
 +
::* Cut tubing
 +
::* Glass blow thermometer bulb
 +
::* Fill
 +
::* Calibrate
 +
 +
:- '''Worksheets'''
 +
::* [http://esr.monmsci.net/wiki/images/3/30/Combustion_ex_02.pdf Internal Combustion Engine]
 +
::* [[Media:Heating_cooling_curve.doc|Heating/Cooling worksheet]]
 +
::* [[Media:HW_ConstP_work.docx|Constant pressure work]]
 +
::* Electrical work
 +
::* [[Media:HW_Adiabatic_Cal.docx|Adiabatic Calorimeter]]
 +
::* non-constant pressure work (small lecture)
  
 
===Friday, Sept 4, 2020===
 
===Friday, Sept 4, 2020===
 +
Announcements
 +
:- you should have a thermometer ready to be filled and calibrated by next lab period. Glass blowing area is open for use (work in pairs, pls)...just let me know.
 +
 +
====Sec 2.4: Equilibrium, Change, and Reversibility====
 +
:READ
 +
====Sec 2.5: Reversible Work====
 +
[[File:Screen Shot 2020-09-07 at 8.28.46 AM.png|400px]]
 +
 +
====Sec 2.6: Irreversible Work====
 +
[[File:Screen Shot 2020-09-07 at 8.27.24 AM.png|400px]]

Latest revision as of 13:29, 7 September 2020

...return to Chem 312 - home

Join Zoom Lecture Meeting
Join ZOOM Lab Meeting

Monday, Aug 31, 2020

Continue reading chapter 2

Sec 2.1: Internal Energy and !st Law of Thermodynamics (review)

U <-- internal energy (1st thermodynamic state function)

Uf - Ui = ΔU, the change in the internal energy
  • we cannot measure Uf or Ui, only ΔU.

First Law of Thermodynamics: the change in the system's internal energy is equal to, but opposite in sign, to the change in the surround's internal energy.

ΔUsys = - ΔUsurr

How does one measure ΔU?

- changes in the system variables (ΔP, ΔV, ΔT, Δn) are an indication of ΔU; changes in system variables result in either heat (q) transfer or work (w) being done on or by the system; calculation of q or w leads directly to ΔU.
ΔP, ΔV, ΔT, Δn --> q (heat), w (work) --> ΔU
Heat and work are both defined as a transfer of energy between the system and surroundings.

The first Law of thermodynamics can also be stated as:

ΔU = q + w

Sec 2.2: Heat (q)

Heat is transitory; heat is not a thing. We DO NOT use the term Δq (for change in heat), we instead say that heat flows from one place to another.
Heat naturally flows from hotter/higher temperature to cooler/lower temperature objects (Zeroth Law of Thermodynamics).
Heat sign convention
- we speak of heat from the perspective of the system (unless otherwise stated).
- when the system loses heat, we identify this quantity of heat as negative (or lost), -q; loss of heat is generally associated with a decrease in temperature, ↓T.
- when the system gains heat, we identify this quantity of heat as positive, +q or q (or gained); ; gain of heat is generally associated with a increase in temperature, ↑T.
Example

heat (or caloric <-- historical) is measured by using a heat-meter or a calorie-meter, or calorimeter; hence calorimetry.

Calorimeter.PNG
measure ΔT --> ΔT q,
q = mass of H2O * specific heat/heat capacity * ΔT
Note: heat capacity is not really a constant...

Wednesday, Sept 2, 2020

Sec 2.2: Work (w)

Work is transitory, only energy, not work is associated with the initial or final states. We DO NOT use the term Δw (for change in work), we instead say that work was done on or by the system.
Work occurs when a force is applied by the system or on the surroundings.
Work sign convention
- we speak of work from the perspective of the system (unless otherwise stated).
- when the system does work on the surroundings, we identify this quantity of work as negative (or lost), -w.
- when the system has work done on it by the surroundings, we identify this quantity of work as positive (or gain), +w or w.
Details
Work diagram.png
Screen Shot 2020-09-02 at 8.04.33 AM.png
Example Work (expansion) Calculation

Calculate the work involved when 20.0 L of an ideal gas expands to a volume of 85.0 L against a constant pressure of 0.980 bar.

Screen Shot 2020-09-02 at 8.28.29 AM.png
Types of Work (Table 2.1)
- Expansion work --> ΔP, ΔV, units Pa*m3 = J
- Electrical work --> Potential (V <-- sorry not volume), current (I in amps), units Volts*charge = J
- others...spring stretching/contracting, surface tension, etc. (not discussed here).
Heat/Work (Electrical) Example

Adiabatic Calorimeter

Adiabatic Cal.png

Consider an adiabatic calorimeter where the inner bath (400 g H2O) temperature increases by 12.2 deg C; how long would the heater (120 V, @4.17 amps) run in order to insure that the outer bath (400 g H2O) would be at the same temperature?

(P = I * V; w = V * I * sec; J = P * sec)
answer: 41 sec

Thursday, Sept 3, 2020

Meet in CSB 378

Activities

- PChem Toolbox check
  • identify tools --> list of toolshere
  • does circuit tester work...plug it in...
  • Demo of Kill-A-Watt (1500 W heating element, stirring hot plate)
- Thermometer calculation/Excel
  • Equation here
  • Set up spreadsheet (calculate change in height of liquid given other variables)
  • Measure glass tubing dimensions (use calipers from toolbox)
  • Use Excel to determine thermometer dimensions
- Make thermometer
  • Cut tubing
  • Glass blow thermometer bulb
  • Fill
  • Calibrate
- Worksheets

Friday, Sept 4, 2020

Announcements

- you should have a thermometer ready to be filled and calibrated by next lab period. Glass blowing area is open for use (work in pairs, pls)...just let me know.

Sec 2.4: Equilibrium, Change, and Reversibility

READ

Sec 2.5: Reversible Work

Screen Shot 2020-09-07 at 8.28.46 AM.png

Sec 2.6: Irreversible Work

Screen Shot 2020-09-07 at 8.27.24 AM.png