HPLC
The HPLC, or High Pressure Liquid Chromatography instrument, was used to test the caffeine standards and samples.
Description
The following video is a very helpful short introduction to how the HPLC works.
Procedure
The following steps were used to run the HPLC. A method was previously created to run with our caffeine samples that allows for the analysis of absorbance at 273 nm, which is the lambda max for caffeine.
1) Fill HPLC vials with samples and standards.
2) Place the vials in the autosampler, taking note of which sample is in which slot.
3) Close the autosampler.
4) Click "file" --> "new sample set" --> "sample set"
5) Set flow rate and solvent to the desired settings --> click "go."
6) Click inside the sample set box and name each sample, set a method, and change the time, making sure the name of the sample matches the vial number of where the vial is located. (make sure to run the first sample twice, to ensure an accurate reading)
7) Select a stop method for the last sample to ensure the machine does not run continuously.
8) Click "run sample set"
Data
Below is the data we analyzed from the HPLC. These chromatograms show where each standard absorbed at 237 nm, so the coffee samples can be tested against these standards for caffeine levels.