Difference between revisions of "Poseidon Syringe Pump"

Revision as of 05:11, 22 January 2019

This is a syringe pump created by the Pachterlab at CalTech. The project page is found here: Poseidon.

You can find the list of materials and vendors here.

Next, you must print the parts for the syringe pump apparatus.

The .stl files for the 3D printed parts can be found here.

The Pachter lab has created helpful videos on the construction of the pump apparatus once you have all the necessary materials and 3D printed parts.

@@ Line 1: / Line 1: @@
 === This page is dedicated to the set-up of the Poseidon Syringe Pump (as originally constructed by the Pachter Lab at CalTech) for Advanced Physical Chemistry (Spring 2019). ===
+== Overview ==
+This is a syringe pump created by the Pachterlab at CalTech. The project page is found here: [https://github.com/pachterlab/poseidon Poseidon].
 == Obtaining Materials and Printing Parts ==
@@ Line 7: / Line 11: @@
 Next, you must print the parts for the syringe pump apparatus.
-These parts can be found at the Project Github: [https://github.com/pachterlab/poseidon | Poseidon]
+The .stl files for the 3D printed parts can be found [https://github.com/pachterlab/poseidon/tree/release/HARDWARE/pump/stl here].
+== Assembly of 3D-Printed Parts ==
+The Pachter lab has created helpful videos on the construction of the pump apparatus once you have all the necessary materials and 3D printed parts.
+[https://www.youtube.com/watch?v=7YSiO6usR1M Syringe Pump Assembly]
+[https://www.youtube.com/watch?v=Szg-vjukonA Microscope Assembly (Optional)]
+== Raspberry Pi Set-Up ==
+[https://www.youtube.com/watch?v=Xl02fsRCJ7U Arduino Assembly]
+[https://www.youtube.com/watch?v=g3pXNY8snOg Raspberry Pi Assembly]