Difference between revisions of "Emission Spectra of Different Metals"

From MC Chem Wiki
Jump to navigation Jump to search
(Created page with "Three metals were chosen for the experiment: Magnesium, Strontium, and Calcium A magnesium ribbon was used, then strontium and calcium bits were used. The metals emission spec...")
 
Line 1: Line 1:
Three metals were chosen for the experiment: Magnesium, Strontium, and Calcium A magnesium ribbon was used, then strontium and calcium bits were used. The metals emission spectra were found by taking a piece of the metal and heating it up with a hand-held torch. First, the torch would heat the metal until the metal sparked. Once sparked it would emit a light. The length of emission of the light would depend on the metal and the amount. Once the metal emitted light, the distance   The instrument used for this experiment was the Ocean Optics Red Tide USB650 UV.
+
The instrument used for this experiment was the Ocean Optics Red Tide USB650 UV. Three metals were chosen for the experiment: Magnesium, Strontium, and Calcium. A magnesium ribbon, strontium, and calcium bits were used. The metals emission spectra were found by taking a piece of the metal and heating it up with a hand-held torch. First, the torch would heat the metal until the metal sparked. Once sparked it would emit a light. The length of emission of the light would depend on the metal and the amount. Once the metal emitted light, the distance from the metal to the detector had to be adjusted to get within a reasonable intensity.
 +
 
 +
[[File:Magnesium.jpg|720px|thumb|left|Emission spectra of the laser cutter in use]]

Revision as of 23:59, 26 January 2017

The instrument used for this experiment was the Ocean Optics Red Tide USB650 UV. Three metals were chosen for the experiment: Magnesium, Strontium, and Calcium. A magnesium ribbon, strontium, and calcium bits were used. The metals emission spectra were found by taking a piece of the metal and heating it up with a hand-held torch. First, the torch would heat the metal until the metal sparked. Once sparked it would emit a light. The length of emission of the light would depend on the metal and the amount. Once the metal emitted light, the distance from the metal to the detector had to be adjusted to get within a reasonable intensity.

Error creating thumbnail: File with dimensions greater than 12.5 MP
Emission spectra of the laser cutter in use