Difference between revisions of "Arduino"
Jump to navigation
Jump to search
| Line 14: | Line 14: | ||
====Blinking LED==== | ====Blinking LED==== | ||
Under File/Examples/Explora/Beginners choose "ExploraBlink" | Under File/Examples/Explora/Beginners choose "ExploraBlink" | ||
| + | |||
| + | Modifications | ||
| + | :1) change from 6 colors to only the 3 primary colors by "commenting out" the yellow, cyan, magenta entries... | ||
| + | :2) Change the intensity of the red LED...255, 128, 64... | ||
| + | :3) Change the duration of the LED...2000 ms as opposed to 1000 ms... | ||
Revision as of 22:40, 23 April 2019
This is a page describing some basics associated with Arduino software/hardware.
Software
Software can be downloaded from the following ink:
Explora Board (Hardware)
The Explora board is easy way to start coding with Arduinos. The Explora board has multiple devices (slider, LED, speaker, microphone, buttons) built-in and hence eliminates the need to deal with the initial complications associated with wiring up an Arduino. You will of course what to play around with wiring at a later time.
Upon launching the Arduino software you must tell the software which Arduino board you are using...
- - under Tools/Board -->select Arduino Explora
- - under Tools/Port --> select /dev...(Arduino Explora)
Blinking LED
Under File/Examples/Explora/Beginners choose "ExploraBlink"
Modifications
- 1) change from 6 colors to only the 3 primary colors by "commenting out" the yellow, cyan, magenta entries...
- 2) Change the intensity of the red LED...255, 128, 64...
- 3) Change the duration of the LED...2000 ms as opposed to 1000 ms...