Difference between revisions of "Raspberry Pi"

Latest revision as of 14:26, 23 April 2019

This is an introductory page describing how to setup a new Raspberry Pi.

Suggested 1st video--> https://www.youtube.com/watch?v=gbJB3387xUw

Hardware

- Raspberry Pi

- Power adapter (2.5 V

- USB keyboard

- USB mouse

- HDMI monitor

- micro SD card (for OS and storage - 8G min)

Software NOOBS/Raspbian

Software needs to be loaded onto the micro SD Card (note that website has been modified since this video was posted). Note: You will need to unzip(extract) the download directly to the sd card. The file path will be something like /F:

https://www.raspberrypi.org/help/noobs-setup/2/

Main Raspberry Pi site

https://www.raspberrypi.org/

Direct link to "Downloads"

https://www.raspberrypi.org/downloads/

Building the Case

https://www.youtube.com/watch?v=X55kNoiVYZs

Hooking every thing up

- Quick Intro/Setup

https://www.google.com/search?source=hp&ei=388XW9acOYezjwTcl6e4Bg&q=raspberry+pi+3+setup&oq=raspberry+pi+3+setup&gs_l=psy-ab.3..0l10.739.8619.0.9109.11.10.0.0.0.0.224.1131.6j3j1.10.0....0...1.1.64.psy-ab..1.10.1131.0..0i131k1.0.BVNuMfkoKJI#kpvalbx=1

- Extended version

https://www.youtube.com/watch?v=gbJB3387xUw

Install Arduino IDE Software

1) you need to first "update" and "upgrade" the Raspbian by typing/pasting the following commend into the terminal window:

sudo apt-get update && sudo apt-get upgrade

2) then install the Arduino software:

sudo apt-get install arduino

-or-

The following is the manual way to install the most up-to-date Arduino software:

1) Go to the following link: Arduino Link

2) Download the "Linus Arm" file on the right side of the window.

3) Once downloaded on the Raspberry Pi, type in the following code into the terminal window:

cd Downloads/

hit enter

tar -xf arduino-1.8.8-linuxarm.tar.xz

hit enter

sudo mv arduino-1.8.8 /opt

hit enter

sudo /opt/arduino-1.8.8/install.sh

hit enter

   *Note: The version number will change in time, so enter the current version in place of the 1.8.8

Projects

Thing Dispenser

Science Software for Raspberry Pi

Science Software

from link above (for installing software)

make sure your pi software is uptodate... sudo apt-get update

then install software packages...sudo apt-get install package name

see website above for software packages available.

suggested: Jmol <-- for visualizing protein structure

Maybe? GROMACS <-- molecular dynamics simulations OpenBabel_gui <--chemical file conversion

NOT suggested: Pymol <---way too slow on Pi 3+

@@ Line 1: / Line 1: @@
 This is an introductory page describing how to setup a new Raspberry Pi.
-https://www.youtube.com/watch?v=gbJB3387xUw
+Suggested 1st video--> https://www.youtube.com/watch?v=gbJB3387xUw
 ===Hardware===
 :- Raspberry Pi
+::[[File:raspberry pi pinout.png|200px]]
 :- Power adapter (2.5 V
 :- USB keyboard
@@ Line 11: / Line 12: @@
 :- micro SD card (for OS and storage - 8G min)
-===Getting Software on to SD Card NOOBES/Raspian===
+===Software NOOBS/Raspbian===
-https://www.raspberrypi.org/help/noobs-setup/2/
+Software needs to be loaded onto the micro SD Card (note that website has been modified since this video was posted).
+Note: You will need to unzip(extract) the download directly to the sd card. The file path will be something like /F:
+:https://www.raspberrypi.org/help/noobs-setup/2/
+Main Raspberry Pi site
+:https://www.raspberrypi.org/
+Direct link to "Downloads"
+:https://www.raspberrypi.org/downloads/
+===Building the Case===
+https://www.youtube.com/watch?v=X55kNoiVYZs
+{|
+|[[File:case_01.jpg|200px]] [[File:case_02.jpg|200px]]
+|}
 ===Hooking every thing up===
 :- Quick Intro/Setup
@@ Line 20: / Line 35: @@
 :- Extended version
 https://www.youtube.com/watch?v=gbJB3387xUw
+===Install Arduino IDE Software===
+) you need to first  "update" and "upgrade" the Raspbian by typing/pasting the following commend into the terminal window:
+::'''sudo apt-get update && sudo apt-get upgrade'''
+) then install the Arduino software:
+::'''sudo apt-get install arduino'''
+-'''or'''-
+The following is the manual way to install the most up-to-date Arduino software:
+) Go to the following link: [https://www.arduino.cc/en/Main/Software Arduino Link]
+) Download the "Linus Arm" file on the right side of the window.
+) Once downloaded on the Raspberry Pi, type in the following code into the terminal window:
+::'''cd Downloads/ '''
+::*hit enter
+::'''tar -xf arduino-1.8.8-linuxarm.tar.xz'''
+::*hit enter
+::'''sudo mv arduino-1.8.8 /opt'''
+::*hit enter
+::'''sudo /opt/arduino-1.8.8/install.sh'''
+::*hit enter
+    *Note: The version number will change in time, so enter the current version in place of the 1.8.8
+===Projects===
+[http://esr.monmsci.net/wiki/index.php/Thing_Dispenser Thing Dispenser]
+===Science Software for Raspberry Pi===
+[http://www.raspberryconnect.com/raspbian-packages-list/item/89-raspbian-science#p Science Software]
+:from link above (for installing software)
+::make sure your pi software is uptodate... ''sudo apt-get update''
+::then install software packages...''sudo apt-get install package name''
+:: see website above for software packages available.
+'''suggested:'''
+Jmol <-- for visualizing protein structure
+'''Maybe?'''
+GROMACS <-- molecular dynamics simulations
+OpenBabel_gui <--chemical file conversion
+'''NOT suggested:'''
+Pymol <---way too slow on Pi 3+