Difference between revisions of "File:Cast in desiccator.jpg"

Latest revision as of 20:47, 7 April 2016

A picture showing the 3D printed cast in a desiccator.

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	20:47, 7 April 2016		2,432 × 4,320 (2.7 MB)	Kcherry (talk \| contribs)	A picture showing the 3D printed cast in a desiccator.

You cannot overwrite this file.

The following page uses this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Camera manufacturer	Motorola
Camera model	XT1080
Exposure time	387/50,000 sec (0.00774)
F Number	f/2.4
ISO speed rating	160
Date and time of data generation	15:28, 7 April 2016
Lens focal length	4.499 mm
Horizontal resolution	72 dpi
Vertical resolution	72 dpi
File change date and time	15:28, 7 April 2016
Y and C positioning	Centered
Exposure Program	Manual
Exif version	2.2
Date and time of digitizing	15:28, 7 April 2016
Meaning of each component	Y Cb Cr does not exist
APEX shutter speed	7.01
APEX aperture	2.4
APEX brightness	-1
APEX exposure bias	0
Maximum land aperture	2.4 APEX (f/2.3)
Subject distance	1.97 meters
Metering mode	Average
Light source	Cool white fluorescent (W 3900 – 4500K)
Flash	Flash did not fire
Supported Flashpix version	1
Color space	sRGB
Scene type	49
Custom image processing	Custom process
Exposure mode	Auto bracket
White balance	Auto white balance
Digital zoom ratio	1
Scene capture type	Standard
Contrast	Normal
Saturation	Normal
Sharpness	Soft